FIX: Error code 0x80070035 – The network path was not found

The error code 0x80070035 is certainly a daunting one. You see, this error means that you cannot connect to the internet. Most people just cut to the chase and take the phone to the nearest AT&T store. However, this is far from the only possible fix. You can try and troubleshoot this problem using the following steps:

It’s crazy how much time and energy some people waste each day trying to fix error code 0x80070035 when it’s not really their fault that the network path was not found. Not all network paths are created equally, and some graphics cards and routers can be really finicky and will not work with all network cables.

The most common Windows error code is 0x80070035, and it indicates the network path was not found error. This error code is caused due to your network card not being detected properly by your Windows or internet service provider. Although, most of the people would face this error due to their network card not being detected properly, there are other reasons which can also cause this error.


Ivan Jenic’s contribution

Expert in Troubleshooting

Ivan has gone deep into knowing this operating system, with a specialty in drivers and driver problems, thanks to his passion for all things Windows and his natural curiosity. When he isn’t tackling, he is… Continue reading

9th of August, 2023

Publish date: March 2023

  • When your computer can’t identify the path of a network it’s connected to, the error number 0x80070035 appears.
  • This may limit file sharing by preventing appropriate cooperation between PCs and users on the same home network.
  • The solution to Error code 0x80070035 – The network path was not discovered may be to enable SMB V1.0.


To fix various PC problems, we recommend Restoro PC Repair Tool:This software will repair common computer errors, protect you from file loss, malware, hardware failure and optimize your PC for maximum performance. Fix PC issues and remove viruses now in 3 easy steps:

  1. Download the Restoro PC Repair Tool, which includes patent-pending technologies (patent available here).
  2. To identify Windows faults that may be causing PC difficulties, click Start Scan.
  3. To address problems that are impacting your computer’s security and performance, click Repair All.
  • This month, 0 readers have downloaded Restoro.

Internal networks should be straightforward to set up and utilize. Despite all of the advances in the area, consumers continue to have connection problems.

Computers using Microsoft’s operating system and connected to the same network should be able to view each other’s data without the need of a cable or software, but this isn’t always the case.

There have been complaints of issues with the internal network, including error number 0x80070035 and the message “The network route was not discovered.”

What does the 0x80070035 error code mean?

Typically, each error is accompanied by a code and a message providing some information about the incident, allowing you to quickly determine what went wrong.

They attribute the difficulty in this instance to network connection problems, which occur when your device is unable to locate the trail of a network to which it is linked.


Even though this is a crucial information, bear in mind that the mistake may arise from a variety of sources and in various places across the operating system.

As a result, it is very difficult for someone without technical expertise or experience to resolve the problem without assistance.

Why am I getting the 0x80070035 error code?

While there is no exact solution to this query, several customers found that altering the name of the machine they were attempting to connect to to something shorter resolved the problem.

Others claim that this issue was caused by faulty registry entries, which they were able to resolve by correcting them.

Your antivirus or firewall settings may potentially be causing error number 0x80070035, since these applications may limit resources and restrict Internet access.

While there are many potential reasons for this message issue, we have prepared a comprehensive list of possible remedies to assist you. Please see the list below.

On Windows, how can I repair the problem number 0x80070035?

1. Run the Troubleshooter for Windows Updates.

  1. The Settings app may be accessed by pressing the Start button.1628502390_152_FIX-Error-code-0x80070035-The-network-path-was-not
  2. Head over to Update & Security.Dell-touch-screen-driver-is-missing
  3. Select Troubleshoot from the drop-down menu.1628502391_296_FIX-Error-code-0x80070035-The-network-path-was-not
  4. Additional troubleshooters should be selected.1628502392_628_FIX-Error-code-0x80070035-The-network-path-was-not
  5. Locate Windows Update and choose Run the troubleshooter from the drop-down menu.1628502392_701_FIX-Error-code-0x80070035-The-network-path-was-not
  6. Follow the wizard’s instructions and let him complete the job.
  7. Your computer should be restarted.

2. Turn off any third-party firewalls.

If you’re certain that the internal network setup is correct but the issue continues to occur, you should disable the third-party firewall.

Third-party firewalls are included in some contemporary antivirus suites. This additional layer of security is really appreciated, but nothing can ensure that it will not disrupt the internal network.


Some people were able to permanently resolve the problem 0x80070035 by deactivating it. So, don’t be afraid to give it a go and see for yourself.

To prevent these problems, you may want to change your firewall. Take a look at our list of the top two-way firewalls for your computer.

3. Enable SMB Version 1.0.

  1. To open Turn Windows features on or off, open Search, enter Windows Feature, then click.1628502393_753_FIX-Error-code-0x80070035-The-network-path-was-not
  2. SMB 1.0/CIFS File Sharing Support may be found here.1628502394_837_FIX-Error-code-0x80070035-The-network-path-was-not
  3. Click OK after checking the box.1628502394_79_FIX-Error-code-0x80070035-The-network-path-was-not

4. Modify the AllowInsecureGuestAuth value.

  1. To open the run box, press the Windows + R keys together.
  2. Click OK after typing regedit.1628502395_706_FIX-Error-code-0x80070035-The-network-path-was-not
  3. Go to HKEY LOCAL MACHINESYSTEM on your computer. CurrentControlSetServices LanmanWorkstationParameters1628502396_613_FIX-Error-code-0x80070035-The-network-path-was-not
  4. AllowInsecureGuestAuth may be found in the AllowInsecureGuestAuth folder.1628502396_674_FIX-Error-code-0x80070035-The-network-path-was-not
  5. Select Modify from the context menu by right-clicking on it.1628502397_635_FIX-Error-code-0x80070035-The-network-path-was-not
  6. Change the value from 0 to 1.1628502397_75_FIX-Error-code-0x80070035-The-network-path-was-not
  7. Click the OK button.

5. Make advanced sharing available.

  1. Right-click on your Local disk (C:) and choose Properties.1628502398_922_FIX-Error-code-0x80070035-The-network-path-was-not
  2. Select the Sharing option from the drop-down menu.1628502399_625_FIX-Error-code-0x80070035-The-network-path-was-not
  3. Go to the Advanced Sharing section.1628502399_939_FIX-Error-code-0x80070035-The-network-path-was-not
  4. Select the Share this folder checkbox.1628502400_957_FIX-Error-code-0x80070035-The-network-path-was-not
  5. To save your changes, click Apply then OK.

If the sharing property isn’t enabled, you’re likely to see this error. You must ensure that your device can share its directories in order for computers to transmit and receive files and data.

6. Change the security settings on your network

  1. To open the run box, press Windows + R, enter secpol.msc, and then click OK.1628502400_466_FIX-Error-code-0x80070035-The-network-path-was-not
  2. From the left pane, choose Local Policies.1628502401_246_FIX-Error-code-0x80070035-The-network-path-was-not
  3. From the right pane, double-click Security Options.1628502402_548_FIX-Error-code-0x80070035-The-network-path-was-not
  4. Locate and double-click Network security: LAN Manager authentication level.1628502403_19_FIX-Error-code-0x80070035-The-network-path-was-not
  5. From the drop-down menu choose Send LM & NTLM-use NTLMv2 session security if negotiated.1628502404_986_FIX-Error-code-0x80070035-The-network-path-was-not
  6. Then, to save the changes, click Apply and OK.

7. Switch on Network Discovery.

  1. After clicking the Start button, enter Control Panel into the Start menu’s search box.1628502405_604_FIX-Error-code-0x80070035-The-network-path-was-not
  2. Go to Control Panel and click on View as > Small icons from the top right corner.1628502405_975_FIX-Error-code-0x80070035-The-network-path-was-not
  3. Select Network and Sharing Center from the drop-down menu.1628502406_22_FIX-Error-code-0x80070035-The-network-path-was-not
  4. Change advanced sharing options from the left pane.1628502406_110_FIX-Error-code-0x80070035-The-network-path-was-not
  5. Turn on network discovery by selecting this option.1628502407_62_FIX-Error-code-0x80070035-The-network-path-was-not
  6. Check to see whether the issue has been resolved by rebooting your computer.

8. Reinstall the network adapters on your computer.

  1. Select Device Manager with a right-click on the Start button.How-to-upgrade-the-SteamVR-graphics-driver
  2. Select the Show Hidden Drivers option from the View menu.1628502408_21_FIX-Error-code-0x80070035-The-network-path-was-not
  3. Network adapters should be located and expanded.1628502408_896_FIX-Error-code-0x80070035-The-network-path-was-not
  4. By right-clicking on each driver and selecting Uninstall Device, all of the drivers will be uninstalled.1628502409_982_FIX-Error-code-0x80070035-The-network-path-was-not
  5. Check if the error persists after rebooting your computer.

Windows-10-Activation-error-0xc0020036 NOTE

After you reboot your PC, the drivers will reinstall, so make sure you have a steady Internet connection.

9. Make use of the Group Policy Editor for Local Groups.

9.1 Make insecure guest logons possible.

  1. To launch the Local Group Policy Editor, go to Search by clicking the magnifying glass in the bottom left corner and searching for gpedit.msc.1628502410_801_FIX-Error-code-0x80070035-The-network-path-was-not
  2. Click Computer Configuration under Local Computer Policy.1628502410_29_FIX-Error-code-0x80070035-The-network-path-was-not
  3. Administrative Templates should be double-clicked.1628502411_77_FIX-Error-code-0x80070035-The-network-path-was-not
  4. Now choose Network from the drop-down menu.1628502411_304_FIX-Error-code-0x80070035-The-network-path-was-not
  5. To open the Lanman Workstation, look for it and click on it.1628502412_723_FIX-Error-code-0x80070035-The-network-path-was-not
  6. Enable unsafe guest logons by double-clicking it.1628502412_328_FIX-Error-code-0x80070035-The-network-path-was-not
  7. To enable insecure visitor logons to an SMB server, choose the Enabled option. 1628502413_114_FIX-Error-code-0x80070035-The-network-path-was-not
  8. To save the adjustments, click Apply, then OK.

Keep in mind that activating this policy option will enable insecure guest logons, which means that unauthenticated access to shared files will be allowed.

9.2 Remove the Microsoft Network client from your computer.

  1. Now go back to Local Computer Policy > Computer Configuration, only this time choose Windows settings.1628502413_739_FIX-Error-code-0x80070035-The-network-path-was-not
  2. Security Settings should be double-clicked.1628502414_243_FIX-Error-code-0x80070035-The-network-path-was-not
  3. Local Policies that are Open.1628502414_186_FIX-Error-code-0x80070035-The-network-path-was-not
  4. Open Security Options by double-clicking it.1628502415_241_FIX-Error-code-0x80070035-The-network-path-was-not
  5. Locate the Digitally sign communications(always) option in the Microsoft Network client.1628502415_509_FIX-Error-code-0x80070035-The-network-path-was-not
  6. Right-click it, choose Properties, and then Disabled in the newly displayed windows, as shown below.1628502416_587_FIX-Error-code-0x80070035-The-network-path-was-not
  7. To save the changes and dismiss the window, click Apply and then OK.

Create a new Windows credential in step 10.

  1. After clicking the Start button, enter Control Panel into the Start menu’s search box.1628502405_604_FIX-Error-code-0x80070035-The-network-path-was-not
  2. Open Control Panel and click on View by > Large icons.1628502416_321_FIX-Error-code-0x80070035-The-network-path-was-not
  3. Select Credential Manager from the drop-down menu.1628502417_841_FIX-Error-code-0x80070035-The-network-path-was-not
  4. Select Windows Credentials from the drop-down menu.1628502417_559_FIX-Error-code-0x80070035-The-network-path-was-not
  5. Remove all of the credentials from the Windows Credential area and restart the machine.
  6. Return to the same page after resuming and select Add a Windows credential.1628502417_368_FIX-Error-code-0x80070035-The-network-path-was-not
  7. Now manually enter the credentials.1628502418_531_FIX-Error-code-0x80070035-The-network-path-was-not
  8. To save the settings, click OK.

TCP/IP NetBIOS Helper service should be checked 11.

  1. As shown before, go to Search, type Services, and choose it from the list of results.1628502418_223_FIX-Error-code-0x80070035-The-network-path-was-not
  2. Go to the TCP/IP NetBIOS Helper page.1628502419_328_FIX-Error-code-0x80070035-The-network-path-was-not
  3. Open Properties by right-clicking on it.1628502420_77_FIX-Error-code-0x80070035-The-network-path-was-not
  4. Select Automatic from the Startup type drop-down menu and save your settings.1628502420_48_FIX-Error-code-0x80070035-The-network-path-was-not
  5. Check for changes after restarting your computer.

To find possible problems, run a System Scan.


To detect Windows problems, click Start Scan.


To solve problems with Patented Technologies, click Repair All.

To identify faults causing security issues and slowdowns, do a PC Scan using Restoro Repair Tool. The repair procedure will replace damaged files with new Windows files and components once the scan is completed.

To ensure that an internal network runs well, you must ensure that the TCP/IP NetBIOS Helper service is active in the background at all times.

This service should be enabled to operate in the background alongside the system, however there have been complaints that it stops working when Windows Updates make significant system changes.

12. Turn on NetBIOS.

  1. To access the elevated command-line, use Windows key + R.
  2. Paste NCPA.CPL into the command prompt and hit Enter.1628502422_696_FIX-Error-code-0x80070035-The-network-path-was-not
  3. Open Properties by right-clicking on your default network.
  4. Click on Properties underneath Internet Protocol Version 4 (TCP/IPv4).1628502422_875_FIX-Error-code-0x80070035-The-network-path-was-not
  5. Select Advanced.1628502423_178_FIX-Error-code-0x80070035-The-network-path-was-not
  6. Select the WINS tab from the drop-down menu.1628502424_663_FIX-Error-code-0x80070035-The-network-path-was-not
  7. Select Enable NetBIOS over TCP from the drop-down menu.1628502425_286_FIX-Error-code-0x80070035-The-network-path-was-not
  8. Click OK to confirm the changes.

The NetBIOS over TCP function is frequently deactivated when error code 0x80070035 occurs, and by activating it, you should be able to permanently resolve the issue.

13. Reset the components of Windows 10 Update

  1. As previously said, go to Search and search for Command Prompt, then select Run as Administrator.1628502425_522_FIX-Error-code-0x80070035-The-network-path-was-not
  2. Now enter the instructions below, pressing Enter after each one:
    • wuauserv wuauserv wuauserv wuauserv
    • cryptSvc should be stopped on the network.
    • halt bits on the internet
    • net msiserver halt1628502426_267_FIX-Error-code-0x80070035-The-network-path-was-not
  3. The next step is to rename the SoftwareDistribution and Catroot2 folders in the Command Prompt by entering the instructions below. After each instruction you enter, be sure to hit Enter:
    • WindowssoftwareDistribution: Ren C SoftwareDistribution.old
    • C:WindowsSystem32catroot2 Catroot2.old Ren C:WindowsSystem32catroot2 Catroot2.old1628502427_273_FIX-Error-code-0x80070035-The-network-path-was-not
  4. Finally, we’ll restart the BITS, Cryptographic, MSI Installer, and Windows Update Services to complete the process:
    • wuauserv wuauserv wuauserv wuauserv
    • cryptSvc should be stopped on the network.
    • halt bits on the internet
    • net msiserver halt
  5. Restart your computer after closing the Command Prompt.

Resetting the Windows 10 update components is a workaround. As the name implies, this is a collection of components that allows you to obtain and install Windows updates.

So, if we reset these components, we should be able to fix our update issue.

14. Perform an SFC scan

  1. Go to Search, enter Command Prompt, and then choose Run as Administrator.1628502425_522_FIX-Error-code-0x80070035-The-network-path-was-not
  2. Press Enter after typing the following command: sfc/scannow1626796781_151_FIX-Windows-cannot-verify-digital-signature
  3. Allow for the completion of the procedure, as it will take some time.
  4. Your computer should be restarted.

15. Add Windows Update servers to your whitelist

  1. After clicking the Start button, enter Control Panel into the Start menu’s search box.
  2. Go to Control Panel and select Network & Internet.1628502428_319_FIX-Error-code-0x80070035-The-network-path-was-not
  3. Go to Internet Options and choose it.1628502428_8_FIX-Error-code-0x80070035-The-network-path-was-not
  4. From the Internet settings window’s top menu, choose the Security tab.1628502429_647_FIX-Error-code-0x80070035-The-network-path-was-not
  5. From the Security box, choose the Trusted Sites option.1628502430_169_FIX-Error-code-0x80070035-The-network-path-was-not
  6. Go to Sites and choose it.1628502431_510_FIX-Error-code-0x80070035-The-network-path-was-not
  7. Remove the check mark from the feature Require server verification (https:) for all sites in this zone.1628502431_306_FIX-Error-code-0x80070035-The-network-path-was-not
  8. There should now be a box that reads “Add this website to the zone.” Type and into the address bar.1628502433_751_FIX-Error-code-0x80070035-The-network-path-was-not
  9. After you’ve filled in the addresses above, click the Add button.1628502433_112_FIX-Error-code-0x80070035-The-network-path-was-not
  10. Restart your computer after saving the changes.

If you’re having trouble installing Windows updates, it’s possible that your system is blocking the Windows Update servers. As a result, be sure to add them to your whitelist.

16. Execute DISM

  1. To access it, click the magnifying glass in the lower left corner of the screen, enter Command Prompt, and then select Run as an administrator.1628502425_522_FIX-Error-code-0x80070035-The-network-path-was-not
  2. Copy-paste the following lines one by one into the command line, pressing Enter after each:
    • ScanHealth DISM /online /Cleanup-Image1628502434_529_FIX-Error-code-0x80070035-The-network-path-was-not
    • DISM /Online /Cleanup-Image /RestoreHealth DISM /Online /Cleanup-Image /RestoreHealth1628502435_719_FIX-Error-code-0x80070035-The-network-path-was-not
  3. Wait for the process to finish, which may take up to 10 minutes.
  4. Restart your computer.

Because Deployment Image Servicing and Management (DISM) is a more powerful troubleshooter than SFC, there’s a good possibility it’ll fix the issue straight away.

Is there a way to prevent running into this problem?

If you want to prevent any errors, staying up to date with your operating system’s updates and drivers is usually a smart place to start.

When sharing files and data, be sure to always check for permission and deactivate any third-party applications that may get in the way.

We do suggest that you utilize a troubleshooting tool since it is more user-friendly, efficient, and capable of assisting you with a wide range of computer problems.

Remember to check whether you have any network access issues and if the OS and network services communications are turned on.

However, if you don’t want to go through the hassle of setting up the computer and avoid dealing with any errors, we have another option for you.

To exchange data, you should use a cloud storage provider. Sync allows you to transfer files of any size to anybody, and you may pick between Windows, Mac, iPhone, iPad, and Android applications.

That’s all there is to it. Although experiencing this issue may be aggravating, following methods can assist you in resolving it quickly.

Make a note of this page in case you need it again, or if you want to assist someone else who is having trouble with this issue.

Learn more about Network locations in Windows 10, including what they are and how to utilize them. This will also assist you in comprehending any possible mistakes, detecting them more quickly in the future, and even preventing them.

If you have any further questions or ideas, please leave them in the comments area below and we will respond as soon as possible.

1617268394_173_Mobile-Hotspot-not-working-on-Windows-10 Are you still experiencing problems? Use this tool to fix them:

  1. Download this PC Repair Tool (download starts on this page).
  2. To identify Windows faults that may be causing PC difficulties, click Start Scan.
  3. To resolve problems with Patented Technologies, click Repair All (Exclusive Discount for our readers).

This month, 0 readers have downloaded Restoro.

Most Commonly Asked Questions

Was this page of assistance to you? 1

Thank you very much!

There are insufficient details It’s difficult to comprehend Other Speak with a Professional

There are currently 7 comments.

If you are experiencing this issue, please make sure your computer has access to the internet and the internet is working properly. This error could also indicate a problem with your network drive. If this is the case, please contact your network administrator.. Read more about error code 0x80070035 windows server 2008 and let us know what you think.

{“@context”:””,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”How do I fix network path not found?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”
In order to fix this issue, you will need to go into the settings menu and find your network path. Once you have found it, you can enter that information in the Beat Saber PS4 Network Settings.”}},{“@type”:”Question”,”name”:”How do I fix network path not found Windows XP?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”
I am not sure what you mean by this.”}},{“@type”:”Question”,”name”:”What does error code 0x80070035?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”
Error code 0x80070035 is a Windows error that can occur when the system cannot find an executable file. This usually happens when the user has deleted or moved an executable file from its original location.”}}]}

Frequently Asked Questions

How do I fix network path not found?

In order to fix this issue, you will need to go into the settings menu and find your network path. Once you have found it, you can enter that information in the Beat Saber PS4 Network Settings.

How do I fix network path not found Windows XP?

I am not sure what you mean by this.

What does error code 0x80070035?

Error code 0x80070035 is a Windows error that can occur when the system cannot find an executable file. This usually happens when the user has deleted or moved an executable file from its original location.

Related Tags

This article broadly covered the following related topics:

  • 0x80070035
  • windows 10 explorer network error 0x80070035 the network path was not found
  • error 0x80070035 windows 7
  • how to fix error code 0x80070035
  • error code 0x80070035 windows 10